Skimming an average room costs around £600 including labour and materials. The real price you pay depends on the size of the room, the condition of the walls and where you live in the UK. A thin finishing skim over sound walls will cost much less than a full replaster where old walls need stripping back to brick first.
What a plastering quote is based on
Plasterers price per job after seeing the room in person. They look at the area in square metres and the ceiling height to decide if they need access equipment. They also check the state of the background to see what preparation is needed before any new plaster goes on the wall.
Preparation might mean stripping wallpaper, removing loose plaster or sealing painted surfaces. Ceilings are usually priced separately from walls and will push the total cost up if they need work. Small jobs usually carry a minimum charge. A minimum patch-repair charge can start from £50, and a minimum charge of around £120 to £150 is also quoted.
Plastering is a physical trade and the condition of your existing walls dictates how much labour is required. If the walls are flat and solid, the job is straightforward. If the plasterer has to deal with crumbling masonry, damp patches or unwanted textured coatings, the preparation time increases.
Do you need a skim coat or a full replaster?
A skim is a thin finishing coat just a few millimetres thick. It goes straight over sound plaster or new plasterboard to give a smooth surface for painting. If your walls are in good condition but look tired, a skim is usually all you need.
A replaster involves hacking off failed plaster and applying a thick backing coat followed by a finish coat. Sometimes it means fixing new plasterboard to the bare walls and skimming over it, known in the trade as board and skim. You need a replaster if the old walls are blown, meaning the plaster has lost its bond with the brickwork behind it.
Another common method is dot and dab, which means sticking new plasterboard directly to masonry walls using dabs of adhesive before skimming. A replaster can double the price compared to a simple skim, so knowing if you need a skim or a full replaster is the biggest factor in your final bill.
Typical prices by room in 2026
These figures show what you can expect to pay for a standard plastering job in different parts of a house. The prices cover labour and materials for an average room.
The table below shows typical published prices for a room in 2026.
|
Room type |
Typical price range |
|---|---|
|
Single bedroom |
£450 to £650 |
|
Double bedroom |
£600 to £850 |
|
Living room |
£850 to £1,150 |
|
Kitchen |
£600 to £950 |
|
Bathroom |
£300 to £500 |
|
En-suite |
£250 to £450 |
These are typical 2026 guide prices from published price guides. Local quotes will differ based on exactly what your room needs.
Price per square metre
Many plasterers work out their quotes based on a rate per square metre. A skim over existing plasterboard usually costs £15 to £25 per square metre. Standard gypsum plastering with simple preparation costs £15 to £40 per square metre.
A full two-coat replaster is typically £30 to £40 per square metre, and replaster or board and skim prices run from £25 to £45 per square metre. Working over old or uneven walls that need extra preparation will push the rate to £35 to £55 per square metre.
Smaller rooms often cost more per square metre because the plasterer still has the same travel and setup time as a larger job. Your exact plastering prices per square metre will vary widely depending on the background surface.
Walls only or walls and ceiling
Including the ceiling in your job will increase the cost because working overhead takes longer and requires more effort. Overboarding a ceiling, which means fixing new plasterboard directly under an old ceiling before skimming it, costs £400 to £1,000 on its own.
This table compares the cost of skimming just the walls versus skimming the walls and ceiling in different room sizes.
|
Room size |
Walls only |
Walls and ceiling |
|---|---|---|
|
Small (2m by 2m) |
£375 to £500 |
£500 to £700 |
|
Medium (3m by 3m) |
£425 to £600 |
£600 to £850 |
|
Large (5m by 4m) |
£550 to £750 |
£800 to £1,100 |
These are typical published prices for 2026. Local quotes will differ depending on the ceiling height and access.
Extras that raise the bill
A standard quote normally includes labour, materials and basic surface preparation like filling minor cracks. Old plaster will also be removed if it cannot be plastered over. Many other tasks are charged separately and you should check if they are included.
Waste disposal can cost £50 to £150 when it is charged separately. Hiring a skip costs £70 to £300 per week, plus £15 to £50 for permits if you need to put it on the road. Any trader who carries waste must be a registered waste carrier, and the register is public.
Stripping wallpaper is another common extra. A single wall costs £40 to £120 to strip, while a large room costs £300 to £600. Removing and refitting a radiator adds £80 to £250. Moving furniture out of the way costs £50 to £100.
Scaffolding for high rooms and decorating after the plastering is finished are usually not included in the initial quote. Painting a room with two coats of emulsion costs around £400. You should also check if the final price includes VAT.
Dealing with textured coatings and older homes
If your room has unwanted Artex or tired render, the preparation rules change. The Health and Safety Executive says textured coatings such as Artex may contain asbestos in any building built or refurbished before 2000.
Work on these coatings does not normally need a licensed contractor, but it must be done by people trained to work safely with asbestos. Homeowners should not sand, scrape or drill suspect coatings and should tell tradespeople about them before work starts.
If you live in an older property, you might have lath and plaster walls or ceilings. This is traditional lime plaster applied over timber laths. Conservation bodies advise repairing original lime plaster where possible and replacing like for like. Applying modern gypsum or cement on old lime walls can trap moisture and cause damp problems.
External walls and building regulations
If you are replastering because of damp, the problem might be on the outside of the house. External render comes in several systems, including:
- Sand and cement
- Lime
- Pebbledash
- Monocouche
- Thin-coat acrylic or silicone systems
You might hear tradespeople mention K Rend, which is a manufacturer's brand name often used loosely for silicone render. Where 25 per cent or more of an external wall is re-rendered, re-plastered or re-lined internally, building regulations normally apply. In these cases, the wall's insulation would normally have to be improved to meet modern standards.
In England, according to the Planning Portal, rendering needs no planning permission if the materials are of similar appearance to the existing house. Permission is required in conservation areas, National Parks, Areas of Outstanding Natural Beauty and the Broads. Listed buildings need formal consent for any significant work, inside or out. If you are unsure, you should check with your local council.
How to prepare your room for a plasterer
Plastering is a messy job. Dust and disruption are unavoidable, especially if old walls need hacking back to bare brick. A professional plasterer will clean up after themselves, but you need to prepare the space before they arrive.
Moving furniture out of the way costs money if the plasterer has to do it. You can save this by clearing the room completely. If you cannot move heavy items, push them to the centre of the room and cover them tightly with dust sheets.
Tell the plasterer if you have expensive carpets or wooden floors. You need to check whether floor protection is included in their quote. A good tradesperson will put down heavy-duty plastic film or corex sheets, but it is always best to confirm this in writing.
How long the job takes
A small room usually takes one day to plaster. A medium room takes one to two days. A large room takes two to three days. Skimming the walls and ceiling of a room takes one to three days depending on the size of the space.
A small patch repair can be finished in two to four hours. Once the plastering is done, you cannot decorate straight away. Fresh plaster takes three to seven days to dry before decorating.
Checking the finish before you pay
Fresh plaster takes three to seven days to dry before decorating, so it will look damp at first. You should check the finish while the plasterer is still on site.
Shine a strong light across the walls to look for a wavy finish or obvious trowel marks. A professional skim should feel smooth to the touch and have clean, crisp angles in the corners and around the skirting boards.
Do not pay the final balance until you have checked the work. Pointing out defects early makes it easier for the plasterer to fix them before the plaster fully sets.
Regional differences
Where you live changes the price you pay for labour. Plastering a single room is quoted at £450 to £850 in the rest of the UK and £550 to £1,100 in London and the South East, which is roughly 20 to 30 per cent higher.
Average day rates show the same pattern. The typical day rate for a plasterer across the UK is £180 to £250. In the North of England, rates sit between £180 and £250. In the Midlands, they run from £200 to £275. In London and the South East, day rates jump to between £250 and £350 or more.
What goes wrong with poor plastering
Plastering is not a licensed trade. There is no legal register like the one for gas engineers, so evidence of past work matters. A CSCS card is for construction sites and is not proof of quality on domestic work. The trade body for the finishes and interiors sector is FIS, and TrustMark is the government-endorsed quality scheme.
Under the Consumer Rights Act 2015, work must be done with reasonable care and skill. If the work is not up to standard, you can ask for it to be put right or seek a partial or full refund. These are the most common mistakes that ruin a plastering job:
- Skimming over loose, damp or unsealed painted surfaces so the new coat cracks or peels.
- Accepting cash-only deals with nothing in writing.
- Relying on quotes that omit preparation, ceilings, scaffolding or waste.
- Dry sanding or scraping Artex without checking for asbestos.
- Applying modern gypsum or cement on old lime walls.
How to compare quotes and what to ask
Always get quotes in writing. A written quote is a fixed price you can rely on, while an estimate is just a rough guess. Cash-only deals with nothing in writing leave you with no proof of what was agreed if the finish is wavy or starts to crack.
Do not accept quotes that omit preparation, ceilings, scaffolding or waste removal. A professional quote will list all these details upfront so there are no hidden charges later. Avoid tradespeople who suggest dry sanding Artex or who plan to use gypsum on old lime walls.
Common questions
How much does it cost to plaster a 3-bed house in the UK?
Plastering an entire house requires a custom quote based on the floor plan and wall condition. You can estimate the total by adding up the individual room prices.
What is the average cost of plastering a room?
Published figures put the average room at around £630, and the average cost to skim a room at around £600 including labour and materials. Your price will be higher if the room needs a full two-coat replaster or the ceiling needs overboarding.
Can I save money by removing old plaster myself?
It is better to leave this to the plasterer and agree it in the written quote. Hacking off plaster is dusty work, and buildings built or refurbished before 2000 may have textured coatings that contain asbestos. Do not sand, scrape or drill suspect coatings, and tell the plasterer about them before work starts. Stripping can also change who deals with the waste, which price guides put at £50 to £150.
Do I need building regulations approval to replaster a room?
If you are replastering or re-lining 25 per cent or more of an external wall internally, building regulations normally apply. In these cases, the wall's insulation would normally have to be improved. If you are unsure whether your job counts, check with your local council's building control.
Next steps
Getting a fair price means knowing exactly what the plasterer is pricing for. Use this checklist when you are ready to hire.
- Ask the plasterer to visit your home to see the room before they quote.
- Check that the written quote lists the exact area covered and whether the ceiling is included.
- Confirm what preparation is included and who is responsible for stripping wallpaper or removing radiators.
- Ask who is clearing the waste and whether the cost of a skip is in the final price.
- Check if VAT is included in the total figure.
- Ask how long the plaster will take to dry before you can start decorating.
Citizens Advice suggests getting written quotes from at least three different traders and getting a contract in writing. They advise against agreeing to a deposit of more than 25 per cent and suggest paying by debit or credit card if you can. You might also be able to cancel within 14 days of agreeing a contract.
When you are ready to get started, you can find a plasterer near you to compare local prices and check their past work.
Find a top rated plasterer near you
1,036 plasterers across the UK, each ranked on their Google rating and the number of reviews behind it. Start with your county: