Cost Guides

Tadelakt and Polished Plaster and What They Cost in a Bathroom

What tadelakt is, why it still needs waterproofing behind it, how it differs from tiles and venetian plaster, how to look after it, and typical prices from published guides with their years.

A seamless curved bathroom wall with a shower niche, a bar of soap and a smooth polishing stone.

Tadelakt is a Moroccan lime based plaster, polished and sealed with olive oil soap, that gives a seamless surface with no grout lines. It is a specialist finish and relatively expensive, especially compared with standard bathroom tiles. The finish takes several coats and a specific polishing technique that needs a dedicated specialist rather than a general builder.

What tadelakt is

Tadelakt is a decorative plaster applied to interior walls to create a smooth, continuous surface. It is a natural, lime based plaster that can be tinted to almost any colour you choose for your bathroom design. Lime plaster is a traditional plaster made with lime rather than gypsum, and it needs a specialist to work with it.

Applying this finish is entirely different from a standard skim, which is a thin finishing coat a few millimetres thick over sound plaster or plasterboard. It is also completely different from a standard replaster, which involves hacking off failed plaster and applying a backing coat plus a finish coat. A specialist builds up the tadelakt finish in several thin coats. They then compress and shine the surface using a plastic trowel, a Japanese trowel or a traditional Moroccan polishing stone.

Once the material is polished smooth, the specialist rubs natural olive oil soap into the surface. This soap chemically reacts with the lime to form calcium stearate. This reaction gives the surface its water resistance. The process cannot be rushed, and if the room temperature drops below 10 degrees, the curing process slows significantly.

How tadelakt shrugs off water and why it still needs tanking

The calcium stearate formed by the soap and lime reaction gives the polished surface its water resistance. However, 2026 advice is that the material is water resistant rather than fully waterproof. It is a decorative finish, but it is not a substitute for a compliant waterproofing system or tanking beneath it.

Tanking is the waterproofing system that sits beneath the decorative finish. You still need a compliant waterproofing system beneath the tadelakt if you are building a wet room or a shower enclosure. Without this waterproofing, the plaster alone is relied on to keep water out.

Relying on the plaster alone to keep a shower completely watertight is a risk that a good specialist will not take. You can read more about the limitations of different materials in the guide to whether you can use waterproof plaster for a bathroom. A reputable tradesperson will insist on applying their finish over a properly tanked and prepared background.

Tadelakt compared with tiles and venetian plaster

Homeowners often choose this Moroccan finish because it provides a seamless surface with absolutely no grout lines. A continuous polished wall has no grout lines. The trade off is that the plaster is a relatively expensive finish, especially compared with standard ceramic or porcelain tiles.

You will also hear this material compared with other polished finishes. Venetian plaster is a lime based decorative finish made from slaked lime putty and marble dust. While venetian plaster also offers a smooth, high end look, polished plaster is a broader term that includes lime, acrylic and resin products that have similar visual effects.

Ask the specialist which product they would use in a wet area. You can read more in the guide explaining what venetian plaster is and what it costs.

Where tadelakt works in a bathroom

This finish is commonly used on walls and ceilings in bathrooms, shower enclosures and wet rooms. It handles the humidity and direct water spray well as long as the background is stable and tanked. Applying the material in two coats should help reduce cracks as the plaster dries and settles.

While it is perfect for walls and ceilings, the material is not always recommended for floors. Grit and small stones carried on the bottom of your feet or shoes can easily scratch the surface.

If your bathroom has old textured coatings on the ceiling, you must be careful. The HSE says textured coatings such as Artex may contain asbestos in any building built or refurbished before 2000. Work on them does not normally need a licensed contractor but must be done by people trained to work safely with asbestos. You should never dry sand or scrape suspect coatings and you must tell tradespeople about them before work starts.

How to look after tadelakt

Looking after this finish is simple but you must follow the correct routine to protect the surface. You keep the walls clean simply by washing them with warm water and a mild soap. Squeegeeing down the walls after each shower is all that is needed to prevent water marks and keep the bathroom looking sharp.

You must avoid standard bathroom cleaners, especially any containing bleach or harsh solvents. Bleach and harsh solvents may destroy the waterproof membrane.

To maintain the protective barrier, regular recoating with a soap solution is advised. You should reapply this soap treatment every one to two years. The walls will also need a professional refresh or polishing every five years or as needed.

What tadelakt costs

Specialist plasterers price per job after seeing it. They will base your quote on several factors.

  • The total area in square metres to be plastered.
  • The state of the background and how much preparation is needed.
  • The ceiling height and how difficult the access is.
  • Preparation tasks like stripping wallpaper or removing loose plaster.
  • Sealing painted surfaces or dealing with old textured coatings.
  • Whether the job includes the ceiling, which is usually priced separately.

Because of the skill required, cheap quotes are a warning sign. Estimates vary. Some 2022 prices for wall installations, including supply and install, start from £180 per square metre. Typical 2026 prices break the costs down into separate material, labour, preparation, sealing and tanking lines, but the per square metre lines do not clearly add up to the totals, so treat them as rough estimates. The two sets of figures are kept separate here.

The table below shows typical 2026 prices for the different elements of a bathroom installation.

Item

Typical 2026 price

Note

Tadelakt material

£20 to £40 per square metre

Materials only

Specialist labour

£120 to £250 per square metre

Alternatively £250 to £400 per day

Surface preparation and boarding

£30 to £80 per square metre

Background work before plastering

Sealing and finishing

£10 to £20 per square metre

Per square metre

Tanking system installation

£400 to £900

Essential waterproof membrane beneath

Feature wall

£800 to £2,000

Total project estimate

Shower enclosure

£1,500 to £4,000

Total project estimate

Full bathroom walls

£2,800 to £5,800

Total project estimate for 20 square metres

These figures are typical published prices for 2026. Local quotes will differ based on the size of your bathroom and whether you live in London and the South East, which cost more. Always check whether VAT, materials, waste removal and floor protection are included in the price. If your specialist removes waste, they must be a registered waste carrier, and the register is public.

What venetian plaster costs

Venetian plaster is a lime based decorative finish, and polished plaster is a broader term. The figures below are for venetian plaster, supplied and applied, and are a separate set from the tadelakt lines above.

The table below shows typical 2026 prices for venetian plaster.

Item

Typical 2026 price

Standard finish

£90 to £120 per square metre

Coloured or dark finish

£120 to £150 per square metre

Bathroom with sealed finish

£2,000 to £4,000

These figures are typical published prices for 2026. Local quotes will differ based on the product used and the preparation required.

What to ask a specialist

Under the Consumer Rights Act 2015, all work must be done with reasonable care and skill. If the finish is wavy or the waterproofing fails due to poor application, the customer can ask for it to be put right or seek a partial or full refund. To protect yourself, Citizens Advice suggests getting a written quote that includes a fixed total price, not just a daily rate. A quote is a fixed price, whereas an estimate is just a rough guess.

Things often go wrong when homeowners accept cash only deals with nothing in writing. If a dispute arises, you have no paper trail to prove what was agreed. You should also watch out for cheap quotes that omit preparation, ceilings, scaffolding or waste removal. Skimming over loose, damp or unsealed painted surfaces is a common shortcut that causes the new coat to crack or peel. A detailed written quote protects you from these hidden costs and poor practices.

The quote should provide a breakdown of all the work to be done and the materials needed. It must show separate costs for each material and part of the work. It should also state how long the price is valid for, whether the price includes VAT, and when the price can go up. Citizens Advice recommends getting written quotes from at least three traders, signing a written contract, paying deposits of no more than 25 per cent and paying by card. You might also be able to cancel within 14 days of agreeing a contract.

When speaking to a specialist, ask them these specific questions to check they understand the job.

  • Who is installing the tanking system beneath the plaster?
  • Which specific finish are you using and is it suitable for a wet room?
  • How many coats of plaster are included in this price?
  • What is the exact aftercare routine for this surface?
  • Can you provide a physical sample of the finish before we start?

Common questions

Is tadelakt completely waterproof?

It is water resistant rather than fully waterproof. The olive oil soap reacts with the lime to form a water resistant surface. You still need a compliant waterproofing system or tanking beneath it to protect the structure of your house.

Can I use normal bathroom cleaners on polished plaster?

No, you must avoid standard bathroom cleaners. Products containing bleach or harsh solvents may damage the finish and the waterproof membrane. You should only use warm water and a mild soap to clean the walls.

Why is a tadelakt bathroom so expensive?

It is a specialist finish that takes several coats and a polishing technique, and it is relatively expensive, especially compared with tiles. Cheap quotes are a warning sign.

Will the plaster crack over time?

Applying the material in two coats helps to reduce the risk of cracking as the plaster cures. Micro surface cracks usually will not affect the waterproof quality of the plaster. A wider crack is a question for the specialist, and for a surveyor or structural engineer if it suggests movement in the building.

What to do next

Before you hire a specialist to plaster your bathroom, you should gather the right information and compare your options. Follow this checklist to ensure your project is priced and planned correctly.

  • Ask the specialist to confirm that the walls and floor are sound enough to take a tanking system.
  • Read the Citizens Advice guide on getting building work done to understand your consumer rights.
  • Ask at least three specialists to visit your home to assess the background and the access.
  • Request a written quote from each trader that breaks down the cost of materials, labour and tanking.
  • Ask to see physical samples of the finish so you can check the colour and the sheen before paying a deposit.

Taking the time to find a specialist who understands lime plaster and waterproofing will save you money and stress. When you are ready to start gathering quotes, you can find a plasterer near you to discuss your bathroom project.

Find a top rated plasterer near you

1,036 plasterers across the UK, each ranked on their Google rating and the number of reviews behind it. Start with your county:

All counties and towns · The UK Top 100 plasterers

Darren Booth
Written by
Darren Booth Editor

Darren is a writer and editor for Top Rated Plasterers, covering plastering, rendering and repairs. When he's not writing guides, he is never far from a cryptic crossword.

Looking for a trusted plasterer? Browse our verified listings.

Find a Plasterer