If your home was built or refurbished before the year 2000, your textured ceiling may contain asbestos. You need a sample analysed by a laboratory to know for sure, and this should happen before a plasterer starts work.
Why Artex is a question for asbestos
Textured decorative coatings, commonly known by the brand name Artex, were a popular way to finish ceilings and walls. Builders used these thick coatings to create swirls, stipples and broken leather patterns, which were excellent at hiding uneven plaster or joints in plasterboard. Asbestos was a widely used material within commercial buildings, homes and machinery until 1999, when it was banned. Because of this long history of use, older textured coatings may contain asbestos fibres.
The Health and Safety Executive states that asbestos may be part of any commercial or domestic building which was built or refurbished before the year 2000. The Health and Safety Executive advises that asbestos materials in good condition and unlikely to be damaged are often best left where they are. You can simply check them from time to time to ensure they are not flaking or cracking.
The danger arises when the textured coating is disturbed by sanding, scraping or drilling during a renovation project. These actions break the material apart and release microscopic asbestos fibres into the air you breathe. If you are planning to hire a plasterer to smooth over an old patterned ceiling, testing is the only way to know exactly what is on your ceiling before the work begins.
Which homes are affected
The critical date for homeowners and landlords to remember is the year 2000. If your property was built or refurbished before this time, you must assume that any textured coating might contain asbestos. This applies to flats, terraced houses, semi-detached properties and commercial buildings alike. A plasterer will treat any pre-2000 textured ceiling with caution until a test proves it is safe.
Asbestos was in use until 1999, when it was banned. A building built or refurbished at any point before 2000 may contain it, so you cannot discount the risk simply because the house feels relatively modern.
The HSE guidance covers buildings built or refurbished before 2000. If your property is older than that, testing is a sensible step before you hire a tradesperson to alter the finish. Plastering is not a licensed trade and there is no legal register like the one for gas engineers, so ask any plasterer about their asbestos awareness training before the job starts.
You cannot tell by looking
Asbestos fibres are microscopic and are mixed thoroughly into the coating material during manufacture. You cannot look at a textured ceiling and know whether it is safe or not. The pattern, the colour of the material and the age of the Artex cannot tell you what is inside it. Even experienced plasterers cannot identify asbestos just by looking at a ceiling.
Some homeowners mistakenly believe that a coating is safe because it looks pristine or has been heavily painted over the years. Paint does not remove any asbestos hidden beneath it, and preparing the wall for a new skim coat can disturb the coating.
This means visual inspections are entirely useless for confirming safety. The only definitive proof comes from laboratory analysis of a sample, and trained professionals should take it.
What not to do
If you suspect your ceiling contains asbestos, the most important rule is to avoid disturbing it in any way. The Health and Safety Executive is clear that you must not try to repair or remove any asbestos materials yourself unless you have had training for non-licensed work. Even small DIY jobs can release harmful fibres into the room, which can linger in the air and settle on your furniture.
If you suspect your ceiling contains asbestos, you must avoid these actions:
- Sanding a textured coating to flatten the peaks before painting or plastering.
- Drilling into the ceiling to fit new light fixtures or run cables.
- Scraping off high spots with a hand trowel or scraper.
- Taking down a lath and plaster or plasterboard ceiling yourself.
Breaking plasterboards or timber laths will snap the coating and release dust into the space. Keep the area completely undisturbed and focus on getting the material tested safely. Dry scraping or dry sanding is the worst thing you can do to an older textured finish.
How testing works
Testing involves a trained professional taking a small piece of the textured coating for analysis in a laboratory. The Health and Safety Executive states that all analysts for asbestos related work must be accredited by UKAS. Leave the sampling to a professional, whatever the size of the area or the condition of the ceiling.
Disturbing the coating to take a sample is exactly where the risk lies, so do not take a sample yourself.
A professional survey provides proper sampling and a clear report, and it is advised for larger or damaged areas. A competent surveyor will visit your home, take the samples and manage the laboratory testing for you. This is the safer route because the professional takes on the risk of disturbing the material.
What testing and removal costs
Prices for testing and removal depend heavily on the size of the area, the ceiling height and the methods used to manage the asbestos safely. An asbestos sample survey takes about one day. The costs scale up significantly if you decide to remove the coating rather than simply cover it up.
The table below shows typical figures for surveying and removing textured coatings.
|
Service |
Typical price range |
|---|---|
|
Asbestos sample survey |
£200 to £250 |
|
Artex removal (per square metre) |
£12 to £125 |
|
Artex removal with asbestos (total) |
£300 to £2,000 |
These are typical prices for 2026 and local quotes will differ depending on your specific home. The wide range for removal reflects the different methods available, such as steam removal, chemical gels, sealing, plastering over or boarding over. Artex removal across a home averages about £1,500, and typically costs £250 to £2,000 or more for multiple rooms.
When you hire a firm to remove or cover the coating, always check what is included in their written quote. A professional quote should clearly state whether the price includes VAT, the cost of materials, proper floor protection and safe waste removal. A trader who carries waste away from your home must be a registered waste carrier, and this register is public so you can check their credentials.
What a positive result means
Finding out that your ceiling contains asbestos does not mean you have to panic or move out of your home. The Health and Safety Executive notes that work on textured coatings is low risk when handled correctly by trained people. You have several safe options for dealing with the ceiling before you decorate.
One option is to leave the coating in place and cover it. The methods include sealing, plastering over and boarding over. A skim is a thin finishing coat applied over the top, and overboarding means fixing new plasterboard directly under the old ceiling and skimming that instead. Any of these must be done by someone trained to work safely with asbestos, and overboarding can still involve work through the coating. It is one way to cover an old ceiling.
If you want the coating removed entirely, leave it to people trained to work safely with asbestos. The methods listed for lower-risk work include steam and gel, and licensed contractors are needed for higher-risk methods. The total cost of removal varies widely, roughly £300 to £2,000 depending on the method and the size of the room.
What trained workers can do
Not all asbestos work requires a heavily regulated licensed contractor. Non-licensed workers can do work on textured coatings, but they must be trained to recognise and work safely with asbestos. This means your chosen plasterer needs specific asbestos awareness training before they touch the ceiling.
Trained non-licensed workers are allowed to carry out several lower risk tasks safely:
- Drilling, boring and inserting or removing screws through the coating to fit fixtures.
- Removing the coating from an area less than around one square metre using steam or gel methods.
- Cleaning up the debris safely if a ceiling or wall covered in the coating collapses.
Larger scale removal by steaming or gelling needs notification as non-licensed work. A licensed contractor is needed for higher risk energetic methods, such as wet abrasive blasting, and for removing coatings that cover asbestos insulating board.
What to tell your plasterer
Clear communication is vital when you hire a tradesperson to work on an older home. If you plan DIY or hire builders, you should inform them of any asbestos materials in your home before they start work. Do not wait until they have set up their tools to mention that the ceiling has not been tested.
When you invite a plasterer to quote for the job, tell them the exact age of the house and whether the ceiling has been tested for asbestos. If you have a laboratory report from a professional survey, show it to them immediately. This allows them to price the job accurately, decide on the best method for covering or removing the material, and confirm whether they have the right training to proceed.
You should also ask the plasterer directly about their qualifications and business practices. Ask whether they have asbestos awareness training and how they plan to protect themselves and your home during the work. Under the Consumer Rights Act 2015, work must be done with reasonable care and skill. If the work falls short, you can ask for it to be put right or seek a partial or full refund. Citizens Advice suggests getting three written quotes, ensuring deposits are no more than 25 per cent, and paying by card for added protection. You might also be able to cancel within 14 days of agreeing a contract.
Common questions
Do I have to remove asbestos Artex by law?
The HSE says materials in good condition and unlikely to be damaged are often best left where they are, and checked from time to time. Get advice if the material is damaged or if you plan to renovate the surface.
Can a plasterer just skim over asbestos Artex?
It depends on the condition of the coating and the method, so ask the plasterer to explain what they would do and whether they have asbestos awareness training. A plasterer must not sand or scrape the coating, and if it is flaking or loose, skimming may not suit it and you may need to look at the cost of overboarding the ceiling instead.
Does a CSCS card prove a plasterer can handle asbestos?
No, a CSCS card is designed for access to construction sites and is not proof of quality on domestic work. It does not mean the person holds specific asbestos awareness training. You must ask the tradesperson directly what training they have completed for non-licensed asbestos work.
What is the difference between a quote and an estimate?
A quote is a fixed price for the job, while an estimate is only a rough guess that can change. When dealing with asbestos, you should always ask for a written quote that details exactly what preparation, materials and waste removal are included. Cash only deals with nothing in writing leave you with very little protection if things go wrong.
What happens if I accidentally scrape an asbestos ceiling?
If you accidentally damage a coating, tell a professional who is trained to work safely with asbestos and let them deal with the debris.
Next steps
Before you bring a plasterer in to update your ceilings, follow these practical steps to keep your home safe and stay within the rules.
- Check the age of your property to see if it was built or refurbished before the year 2000.
- Arrange a professional asbestos survey if you suspect the textured coating might contain asbestos.
- Ensure any laboratory your surveyor uses is accredited by UKAS.
- Decide whether to have the ceiling overboarded, skimmed or safely removed using wet methods.
- Tell your chosen tradesperson about any asbestos materials before they begin work.
- Ask the tradesperson to confirm they hold asbestos awareness training for non-licensed work.
- Check that any trader removing waste from your property is a registered waste carrier.
Dealing with older textured coatings requires a calm approach and the right professional help. Once you have your test results and a clear written quote for covering or removing the material safely, you can find a plasterer near you to finish the job to a high standard.
Find a top rated plasterer near you
1,036 plasterers across the UK, each ranked on their Google rating and the number of reviews behind it. Start with your county: