Maintenance

Painting Render and Choosing the Right Masonry Paint

How long new render must cure before painting, why breathable paint matters on lime and old walls, which renders should not be painted, and typical 2026 repainting costs.

A rendered house wall partly repainted cream with a paint tin and brush on a scaffold ledge.

The right paint for your outside walls depends entirely on what your render is made of. Modern cement render usually takes standard masonry paint, but putting the wrong paint on an old solid wall can trap moisture. Understanding what covers your house and how long it needs to dry will dictate the finish you choose.

Understanding external render types

Before you buy any paint, you need to identify the material on your outside walls. External render comes as sand and cement, lime, pebbledash, monocouche and thin-coat acrylic or silicone systems. You might hear tradespeople mention K Rend. This is simply a manufacturer's brand name often used loosely for silicone render, rather than a completely different material. Your choice of paint is dictated by which of these systems is currently on your house.

Sand and cement render relies on a painted topcoat for its appearance. Older houses often feature lime render. This traditional material behaves very differently and requires specialist finishes to function properly. Some modern systems have the colour mixed all the way through the material and do not require a separate paint layer at all.

Which renders need painting

Sand and cement render is the primary surface that requires painting. This type of external finish relies on masonry paint to seal the surface and provide a clean appearance. You will normally find that sand and cement render is painted and repainted about every five to 10 years to maintain its look and performance.

New sand and cement render needs to dry fully before painting, around four to six weeks. Once it has dried, a suitable masonry paint is applied, and the renderer or decorator can advise which one.

How long to wait before painting new render

If you have just had your house rendered, you must wait for the surface to dry completely before applying any paint. Painting too early can stop lime render curing properly. The exact waiting time depends on the materials used and the weather conditions during the drying period.

Advice varies from a couple of days to six weeks depending on the system, so treat the figures below as a range. Cold weather makes drying take much longer. For a full render system, weather can add about two weeks of variation to the four to six weeks figure.

  • Silicone acrylic renders are the fastest to dry and can take 24 to 48 hours.
  • Standard cement render can take up to six weeks to dry completely.
  • A full render system needs four to six weeks to become fully cured and dried.
  • A paint maker advises about four weeks of curing for every 5 millimetres of new lime render thickness.

If you are unsure about the thickness of your new lime render, check with your lime supplier. Applying a finish too early can stop the lime curing properly.

Choosing paint for sand and cement render

For modern cement render on a modern house, a standard masonry paint is the usual choice. The right paint type depends on the product and the render, so do not assume one tub suits every job.

You should always check the label on the paint tub to ensure it is suitable for external sand and cement surfaces. It is also wise to ask the renderer who applied the coating for their recommendation. They will know what render they used.

Lime render and old walls

Older houses were built using materials that manage moisture differently from modern homes. Indoors, these properties might feature lath and plaster, which is lime plaster spread on timber laths. Outside, these buildings often feature solid walls covered in lime render. Old walls rely on being able to let moisture out, a concept known as breathability.

Standard modern paint systems usually have a lower permeability than traditional finishes. If you apply a conventional plastic-based masonry paint to a lime render, there is the risk of moisture becoming trapped in the wall. A paint maker notes that these plastic-based paints could potentially cause longer term issues by holding damp inside the masonry.

Limewash is the traditional finish for exterior lime render. It is a simple type of traditional breathable paint or coating made from lime and water. The Society for the Protection of Ancient Buildings advises that a traditional limewash is usually the most suitable finish because of its high water permeability.

While limewash is highly permeable, it requires many coats and is labour intensive to apply. As an alternative, one paint maker recommends a silicate paint system. You should never use colourless water-repellent treatments on old walls, as conservation experts advise against them because their long-term effects are unknown.

Weather and preparation

Good preparation matters. The surface should be clean, dry, sound and stable before you paint. If you try to paint over loose, damp or unsealed painted surfaces, the new coat will crack or peel away.

Weather plays a crucial role in how well the paint applies and dries. For lime render finishes, guidance states that the temperature must be at least 8 degrees Celsius both day and night during painting and drying. Ask the decorator how they will deal with the forecast.

Ask a decorator how they will prepare the walls before they start.

Renders you should not paint

Not all external finishes are designed to take a coat of paint. Monocouche is a modern type of render that has the colour mixed through the material itself. It is applied in one coat and dries to provide both the weather protection and the final decorative finish.

Painting over monocouche is generally not recommended. Monocouche has no separate paint topcoat. If your monocouche render is looking tired or you want a different look, re-rendering is the more durable option.

Other through-coloured renders are not meant to be painted either. Check your property documents or ask a tradesperson to identify your render before you paint a surface that was meant to be left as it is.

Typical 2026 costs for painting render

When budgeting for exterior painting or looking at house rendering costs, you need to consider the price of the paint, the labour and any repairs to the underlying wall. Plasterers and decorators price per job after seeing it, basing their quote on the area in square metres, wall height, access and the necessary preparation work. London and the South East cost more.

The table below shows typical 2026 supply-only prices per square metre.

Material

Supply cost per square metre

Masonry paint

£12 to £18

Cement

£15 to £20

Lime

£25 to £30

Pebbledash or roughcast

£35 to £45

Polymer

£40 to £50

Acrylic

£40 to £50

Monocouche

£45 to £55

Your local quotes will differ.

Before painting, you might need to fix damaged areas of the wall. The table below shows typical 2026 prices for cement render and repairs. These figures are separate from the table above, so do not combine them with it.

Service

Price per square metre

Cement render

£30 to £50

Repairs to damaged render

£15 to £30

Repainting discoloured render

About £20

Your local quotes will differ.

Scaffolding is often a separate line on your quote and usually costs £200 to £800 for a week. Small jobs also usually carry a minimum charge. You should always check whether your quote includes value added tax, materials, waste removal and ground protection.

Building regulations and planning rules

If your exterior walls require significant repair before painting, you might trigger local building rules. In England, where 25 per cent or more of an external wall is re-rendered, re-plastered or re-lined internally, building regulations normally apply. In these cases, the wall's insulation would normally have to be improved at the same time.

In England, rendering needs no planning permission if the materials are of a similar appearance to the existing house, but the policy in Wales may differ. Permission is required in conservation areas, National Parks, Areas of Outstanding Natural Beauty and the Broads. Listed buildings need explicit consent for any significant work, inside or out. Conservation bodies advise repairing original lime plaster where possible and replacing it like for like.

If your tradesperson is hacking off failed plaster or old render, they will generate heavy waste. A trader who carries waste must be a registered waste carrier, and this register is public so you can check their credentials. You must also be careful with older textured coatings such as Artex. The Health and Safety Executive says these coatings may contain asbestos in any building built or refurbished before 2000. Work on them does not normally need a licensed contractor but must be done by people trained to work safely with asbestos. Homeowners should not sand, scrape or drill suspect coatings and should always tell tradespeople about them before work starts.

When to hire a professional

Painting the outside of a house involves working at height, and scaffolding is strictly for professionals. While painting a low garden wall might be a weekend task, safely reaching the upper storeys of a house requires proper access equipment and experience.

Plastering and rendering are not licensed trades, so there is no legal register like the one for gas engineers. A CSCS card is for construction sites and is not proof of quality on domestic work. You might look for members of FIS, which is the trade body for the finishes and interiors sector, or tradespeople registered with TrustMark, the government-endorsed quality scheme. Because there is no central register, evidence of past work matters deeply when choosing who to hire.

A written quote is a fixed price, whereas an estimate is merely a rough guess. Citizens Advice suggests getting three written quotes and a written contract before work begins. They advise paying deposits of no more than 25 per cent and paying by card for added protection. Under the Consumer Rights Act 2015, all work must be done with reasonable care and skill. If it is not, the customer can ask for it to be put right or seek a partial or full refund. You might also be able to cancel within 14 days of agreeing a contract.

When speaking to a professional, you should ask specific questions to understand how they plan to tackle the job.

  • Ask what type of paint they intend to use and why it suits your specific render.
  • Ask how they plan to prepare the surface and whether they will wash down the walls first.
  • Ask if scaffolding, waste removal and ground protection are included in the final price.
  • Ask how long they expect the render to dry before they apply the first coat of paint.

If you are unsure about the quality of the background, you might want to know about cracked render repair cost options and when you need a full replacement.

Common questions

Does the weather affect how long render takes to dry?

Yes, the weather plays a major role in the drying process. One tradesperson puts about two weeks of weather variation on the full render system figure of four to six weeks. Cold weather makes the drying process take much longer, and painting too early can stop materials like lime from curing properly.

Can you use standard masonry paint on old lime walls?

Conventional plastic-based masonry paints are not recommended for traditional lime render. These modern paints usually have a lower permeability and there is the risk of moisture becoming trapped in the wall. A paint maker says this could potentially cause longer term issues.

What is the traditional finish for lime render?

Limewash is the traditional finish for exterior lime render because of its high water permeability. It is a simple, breathable coating made from lime and water. However, it requires many coats and is highly labour intensive to apply, and one paint maker recommends a silicate system as an alternative.

Can you change the colour of monocouche render with paint?

Painting over a monocouche surface is generally not recommended by trade experts. Monocouche is a through-coloured material designed to function without a separate paint topcoat. If you want a completely different look, re-rendering the wall is considered the more durable option.

Next steps for your home

Before you buy materials or agree to a quote, you should confirm exactly what is on your walls. Getting the preparation right and choosing a paint that suits your render is a good start.

  • Check whether your home has standard cement render, monocouche or traditional lime render.
  • Look for signs of loose, damp or unsealed painted surfaces that need repairing first.
  • Ensure any new render has been left to dry for the correct number of weeks.
  • Get three written quotes that separate the costs of scaffolding, repairs and painting.
  • Check that your chosen tradesperson is a registered waste carrier if they are removing old materials.

Taking the time to understand your walls means you can hire the right person for the job. When you are ready to start the work, you can find a plasterer near you to inspect the render and provide a fixed written quote.

Find a top rated plasterer near you

1,036 plasterers across the UK, each ranked on their Google rating and the number of reviews behind it. Start with your county:

All counties and towns · The UK Top 100 plasterers

Jake Morrison
Written by
Jake Morrison Editor

Jake researches and writes guides for Top Rated Plasterers, turning prices, rules and official guidance into plain advice for homeowners. He is doing up a Victorian terrace one room at a time.

Looking for a trusted plasterer? Browse our verified listings.

Find a Plasterer